Band Scanner Pro How to: What does (same) and (reg.) mean in the RDS AF List?
This is a citation from US RBDS Standard/EN 50067 standard:
Method B AF coding is used where it is required to indicate frequencies that belong to different regions, which may carry different programs.
For the transmission of the frequency pairs within one block the following convention is used:
- They are generally transmitted in ascending order, e.g. 89.3 - 99.5 or 99.5 - 101.8 F1 < F2
- In special cases they are transmitted in descending order, if they belong to different regions, or carry from time to time different programs, e.g. 99.5 - 90.6 or 100.7 - 99.5 F1 > F2
In both of the above examples 99.5 MHz is the tuning frequency.
Band Scanner Pro How to: Why upon installation of the software, the USB green LED on the unit is flashing rapidly?
Green flashing LED indicates that Band Scanner Pro has no drivers installed. With a normal installation, the driver will be located here: My Computer/Local Disk (C:)/Program Files/Band Scanner Pro/Drivers. Drivers can be found on the supplied CD also, in the 'Drivers' folder. Driver Installation details are described in DEVA User Manuals, chapter 'Installing the Software'
Band Scanner Pro How to: How can I reset the data acquisition?
Press the "SET" button. Whenever setting the frequency (same or not) it will clear all of the acquisitions.